17 Signs That You Work With Repairs To Upvc Windows
17 Signs That You Work With Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as increase energy efficiency.
1. Broken Glass
The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.
For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However, if windows with double panes are held in place by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this instance you'll need find some plastic spacers that will help the new pane to fit correctly into the window frame.
If you're planning to try to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.
It's a good idea to cover the gap with tape after the glass is removed. This will keep water and drafts from entering your property until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the window and the door is significant, you may need to consider security screens that has a window. This will give you the best of both.
2. Sagging
Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a number of problems such as sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are sliding.
Repositioning the hinges could help fix a window that is sliding. First, you'll need to unblock the windows so you can reach the frame. With a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit of your window, tighten the screws to hold them in place.
If you are unable to reposition the hinges you may require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.
UPVC handles can also loosen up. The majority of the time this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform a test fitting. The corners of the sash must align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
It is crucial to act if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.
It is a fairly easy fix that can be completed by any skilled DIYer. Depending on the severity of the problem the old caulking might need to be removed before a new layer is applied. When it comes to uPVC repair, it is important to avoid 'over-caulking'. This can make your window more difficult to clean and lower its energy efficiency.
It is important to check that the drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe cases, you may need to replace the window.
Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or are loose and open with a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Most households in the UK will have either top hung or side-hung uPVC www.repairmywindowsanddoors.co.uk windows that are hinged and, just like any mechanical component they will wear out over time. Changing a window hinge is an easy process, but it's simpler when you have a person to assist in holding the frame in place.
Check that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.
The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to give advice.
Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by a few different factors. The hinges may also become unbalanced due to wear, creating gaps where the sash and frame meet. This can be easily fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them realigned or replaced. Second, the interlock can also become disaligned. This is located on the hinge's side and might require to be cleaned. In some cases it is possible to replace the hinges.
The second most frequent cause of draughts is the window seals. These are prone to wear or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.
Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric filled with some sort of filler and can be positioned on the windowsill on top. They can help keep cold air out and keep your home warm and cosy!
With a little regular maintenance and repairs, your upvc windows will provide excellent security and insulation for your home. However, it is important to recognize that all windows have a life span and eventually, they will reach the point when it's more efficient to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.